Load Cell 1KG 5KG 10KG 20KG HX711 AD Module Weight Pressure Aluminum Alloy Sensor
Regular price
$3.59 CAD
Regular price
Sale price
$3.59 CAD
Unit price
per
Load Cell 1KG 5KG 10KG 20KG HX711 AD Module Weight Pressure Aluminum Alloy Sensor
50KG
Features:
This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales.
The sensor is a group of half-bridge strain gauge.
Fine workmanship and good performance.
Easy to use. Long service life.
3 ways to use it:
1. Use one sensor with an external resistor to form a full-bridge measurement, the range of a sensor range: 50kg. External resistance on the higher requirements.
2. Use two sensors to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2=100kg.
3. Use four sensors to form a full-bridge measurement, measuring range for the sum of four sensors: 50kgx4=200kg.
Specification:
Material: Plastic & metal & PCB board
Dimensions: 3.4x3.4cm/1.34x1.34inch
1/5/10KG
Product Features:
Four lead wires, easy to use, plus driving voltage 5-10V, force changes in the output voltage signal directly.
Installation: Sensor end through the screw hole fixed and the other end left floating state, according to the label indicates the direction of the gravitational force exerted particular attention must not directly push the white plastic cover part of the sensor in order to avoid damage.
Product Specification:
Model: YZC-131
Dimensions: 60x12x12mm/2.36 x 0.51 x 0.51"(L x W x H)
Rated Load: 2 (kg)
Rated output: 1.0 ± 0.15mV / V
Nonlinear: 0.03% F.S
Hysteresis: 0.03% F.S
Repeatability: 0.03% F.S
Creep (5 minutes): 0.05% F.S
Temperature Effect on Output: 0.003% F.S /°C
Temperature Effect on Zero: 0.02% F.S /°C
Zero Balance: ± 0.1000 mV / V
Input impedance: 1066 ± 20% Ω
Output impedance: 1000 ± 10% Ω
Insulation resistance: 2000 MΩ
Operating temperature range: -20 ~ 65°C
Recommended Operating Voltage: 5 VDC
Maximum operating voltage: 10 VDC
Material: Aluminum
Protection: IP65
Cable: φ0.8 × 135 cm
Table size: 160 × 160 mm
Weight: 30g
Package Includes:
1pc Aluminum Alloy Pressure Sensor
50KG
Features:
This load sensor, sometimes called a strain gauge, is the same one found in digital bathroom scales.
The sensor is a group of half-bridge strain gauge.
Fine workmanship and good performance.
Easy to use. Long service life.
3 ways to use it:
1. Use one sensor with an external resistor to form a full-bridge measurement, the range of a sensor range: 50kg. External resistance on the higher requirements.
2. Use two sensors to form a full-bridge measurement, measuring range for the sum of the two sensors: 50kgx2=100kg.
3. Use four sensors to form a full-bridge measurement, measuring range for the sum of four sensors: 50kgx4=200kg.
Specification:
Material: Plastic & metal & PCB board
Dimensions: 3.4x3.4cm/1.34x1.34inch
1/5/10KG
Product Features:
Four lead wires, easy to use, plus driving voltage 5-10V, force changes in the output voltage signal directly.
Installation: Sensor end through the screw hole fixed and the other end left floating state, according to the label indicates the direction of the gravitational force exerted particular attention must not directly push the white plastic cover part of the sensor in order to avoid damage.
Product Specification:
Model: YZC-131
Dimensions: 60x12x12mm/2.36 x 0.51 x 0.51"(L x W x H)
Rated Load: 2 (kg)
Rated output: 1.0 ± 0.15mV / V
Nonlinear: 0.03% F.S
Hysteresis: 0.03% F.S
Repeatability: 0.03% F.S
Creep (5 minutes): 0.05% F.S
Temperature Effect on Output: 0.003% F.S /°C
Temperature Effect on Zero: 0.02% F.S /°C
Zero Balance: ± 0.1000 mV / V
Input impedance: 1066 ± 20% Ω
Output impedance: 1000 ± 10% Ω
Insulation resistance: 2000 MΩ
Operating temperature range: -20 ~ 65°C
Recommended Operating Voltage: 5 VDC
Maximum operating voltage: 10 VDC
Material: Aluminum
Protection: IP65
Cable: φ0.8 × 135 cm
Table size: 160 × 160 mm
Weight: 30g
Package Includes:
1pc Aluminum Alloy Pressure Sensor