Unbranded
NE555 Multivibrator kit NE555P steady-state circuit dual flash LAMP DIY Lab
Regular price
$2.17 CAD
Regular price
Sale price
$2.17 CAD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
NE555 Multivibrator kit NE555P steady-state circuit dual flash LAMP DIY Lab
Product Description:
The NE555 multivibrator kit is a DIY electronics project that allows you to build a steady-state circuit dual flash lamp using the NE555 integrated timer. This kit generates a square wave pulse of a specific frequency that causes two LEDs to flash alternately and produce a clicking sound.
Kit Parameters:
Power supply voltage: 4.5-5.5V (DC voltage, 3 x AA/AAA battery box recommended)
Board size: 2.5*3.5cm
Buzzer: 5V passive buzzer, the sound of tap-tap-tap is small, please note this if you are sensitive to noise.
Functionality:
Upon power-on, the NE555 integrated timer generates a square wave pulse that alternates the high and low levels of the 3-pin output. When the 3-pin is high, LED1 turns off and LED2 lights up, and when the 3-pin is low, LED1 lights up and LED2 turns off. At the same time, capacitor C3 discharges through the loudspeaker, which creates the clicking sound. This kit requires assembly and installation by the buyer.
Package Includes:
1 x NE555 multivibrator kit NE555P steady-state circuit dual flash LAMP DIY Lab.
Product Description:
The NE555 multivibrator kit is a DIY electronics project that allows you to build a steady-state circuit dual flash lamp using the NE555 integrated timer. This kit generates a square wave pulse of a specific frequency that causes two LEDs to flash alternately and produce a clicking sound.
Kit Parameters:
Power supply voltage: 4.5-5.5V (DC voltage, 3 x AA/AAA battery box recommended)
Board size: 2.5*3.5cm
Buzzer: 5V passive buzzer, the sound of tap-tap-tap is small, please note this if you are sensitive to noise.
Functionality:
Upon power-on, the NE555 integrated timer generates a square wave pulse that alternates the high and low levels of the 3-pin output. When the 3-pin is high, LED1 turns off and LED2 lights up, and when the 3-pin is low, LED1 lights up and LED2 turns off. At the same time, capacitor C3 discharges through the loudspeaker, which creates the clicking sound. This kit requires assembly and installation by the buyer.
Package Includes:
1 x NE555 multivibrator kit NE555P steady-state circuit dual flash LAMP DIY Lab.
Share
